Check The Router System Information - TRENDnet TEW-813DRU User Manual

TRENDnet User's Guide

Check the router system information

Advanced > Administrator > Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see
on page 9).
2. Click on Advanced and click on Administrator, then click on Status
System Information
• Firmware Version – The current firmware version your router is running.
• Time: The current time set on your router.
• System Up Time – The duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management page"
Internet Configuration
• Connected Type: Displays the current WAN connection type applied.
• WAN IP Address – The current IP address assigned to your router WAN port or
interface configuration.
• WAN MAC Address: Displays the current WAN MAC address.
• Subnet Mask - The current subnet mask assigned to your router WAN port or
interface configuration.
• Default Gateway – The current gateway assigned to your router WAN port or
interface configuration.
• Primary/Secondary DNS (Domain Name System) Server – The current DNS
address(es) assigned to your router port or interface configuration.
• DHCP WAN Type: These buttons will be available in DHCP WAN type only.
Renew: Click this option to renew your WAN IP address.
o
Release: Click this option to release the WAN IP address of your
o
router.
• PPPoE WAN Type: These buttons will be available in DHCP WAN type only.
Connect: Click this option to connect to your DSL ISP
o
Disconnect: Click this option to disconnect from your DSL ISP.
o
TEW-813DRU
50