TRENDnet TEW-818DRU User Manual page 16

TRENDnet User's Guide
PBC (Software/Virtual Push Button)
Wireless (2.4GHz or 5GHz)> WPS
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WPS.
4. To add a wireless device to your network, simply click the Add Enrollee button in the
router management page, then push the WPS button on the wireless device (consult
wireless device's User's Guide for length of time) you are connecting.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management page"
PIN (Personal Identification Number)
Wireless (2.4GHz or 5GHz)> WPS
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see
on page 17).
2. Click on the wireless band Wireless (2.4GHz or 5GHz) you would like to configure and
click on WPS.
3. Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and
click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.
TEW-818DRU
"Access your router management page"
16