TRENDnet User's Guide
• Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz)
• User Name: The user name needed to log in to your Dynamic DNS service account
• Password: This is the password to gain access to Dynamic DNS service (NOT your
router or wireless network password) for which you have signed up to.
Note: If you would like to discard the changes, click Cancel before you click Save.
Allow remote access to your router management page
Advanced > Administrator > Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Management.
4. Review the setting on the Remote Management section. Click Apply to save settings
© Copyright 2014 TRENDnet. All Rights Reserved.
"Access your router management
page"
• Remote Control: Select enable or disable for the feature.
• Port: Enter the port to assign remote access to the router. It is recommended to
leave this setting as 8080.
Note: If you have configured port 8080 for another configuration section such as
virtual server or special application, please change the port to use.
(Recommended port range 1024-65534)
Reset your router to factory defaults
Advance > Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
"Backup and restore your router configuration
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the side panel of your router, see
Features" on page 5. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
TEW-818DRU
settings" on page 52.
"Product Hardware
"Access your router management
page"
51