Change Your Router Ip Address; Advanced - TRENDnet TEW-818DRU User Manual

TRENDnet User's Guide
• MAC Filter Mode: Select the option you would like to apply to the listed MAC
address.
o Disabled: Select this option to disable MAC filter rule.
o Deny: Select this option to deny listed MAC addresses.
o Allow: Select this option to only allow listed MAC addresses.
• MAC Filters: Enter the MAC address of the devices you would like to filter. (e.g.
00:11:22:AA:BB:CC)
Note: Enter the Add the MAC addresses to the MAC Table first before applying the
MAC filter function.
• Interface: Select the interface of the MAC address filter
o LAN: Local Access Network, wired clients
o WLAN: Wireless Local Access Network, wireless clients
o Both: Select this option if you uncertain which interface to use.
Note: MAC filter can be configured to allow access to the listed MAC address and
deny all others unlisted or vice versa. The recommended function is to choose to
only allow access to the MAC addresses listed and deny all others unlisted because it
is easier to determine the MAC addresses of devices in your network then to
determine which MAC addresses you do not want to allow access. You can check the
DHCP Client List for the MAC addresses of the devices on your network, see page 56
or refer to your computer or device documentation to find the MAC address.
© Copyright 2014 TRENDnet. All Rights Reserved.

ADVANCED

Change your router IP address

Advanced > Setup > LAN Setting
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address
settings as default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0
1. Log into your router management page (see
on page 17).
2. Click on the Advanced tab.
3. Click on the Setup section and click on LAN Setting.
4. In LAN Interface Setting section, Enter the router IP address settings. Click Apply to
save settings.
TEW-818DRU
"Access your router management page"
23