Set Up Dhcp Reservation; Manually Configure Your Internet Connection - TRENDnet TEW-812DRU User Manual

TRENDnet User's Guide
• DHCP Start IP: Changes the starting address for the DHCP server range.
(e.g.192.168.10.20)
• DHCP End IP: Changes the last address for the DHCP server range. (e.g.
192.168.10.30)
Note: The Start IP and End IP specify the range of IP addresses to automatically
assign to computers or devices on your network.
• DHCP Lease Time – Click the drop-down list to select the lease time.
Note: The DHCP lease time is the amount of time a computer or device can keep an
IP address assigned by the DHCP server. When the lease time expires, the computer
or device will renew the IP address lease with the DHCP server, otherwise, if there is
no attempt to renew the lease, the DHCP server will reallocate the IP address to be
assigned to another computer or device.

Set up DHCP reservation

Network > LAN Setting
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 35) or special applications (also called port triggering, see
"Special Applications" on page 36).
1. Log into your router management page (see
on page 16).
2. Click on the Advanced tab.
3. Click on the Setup section and click on LAN Setting.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your router management page"
3. Review the DHCP reservation settings. Click Apply to save settings.
• Hostname: Enter a name of the device you will assign the DHCP reservation rule.
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
• IP Address: Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)
• Enable: Check the Enabled option to enable the reservation.

Manually configure your Internet connection

Advanced > Setup > WAN Setting
1. Log into your router management page (see
on page 16).
2. Click on the Advanced tab.
3. Click on the Setup section and click on WAN Setting.
TEW-812DRU
"Access your router management page"
25