Battery Board (Select Models Only) - HP Pavilion 17 Maintenance And Service Manual

3. Remove the TouchPad board by carefully pushing the TouchPad down (2) and routing the cable
through the opening (3) (the cable was disconnected earlier from the top cover).
Reverse this procedure to install the TouchPad button board.

Battery Board (select models only)

Description
Battery board for HP Pavilion 17 Notebook PC
The battery board is for select HP Pavilion 17 Notebook PC computer models.
Before removing the battery board, follow these steps:
1. Disconnect all external devices connected to the computer.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
3. Remove the battery (see
4. Remove the optical drive.
5. Remove the base enclosure and top cover (see
Remove the battery board:
1. Turn the computer, with the front edge toward you.
2. Remove the two screws (1).
90 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 65).
Base enclosure on page
Spare part number
763710-001
70).