Table of Contents
Advertisement
Location of the thermostat bracket (JP-24).
Remove the thermostat bracket mounting nuts with the 3/8"
nutdriver.
Location of the imperial brass fitting (JP-24).
Removing the imperial brass fitting (Tempstar).
SECTION 5: SERVICE PROCEDURES
RINSE REGULATING THERMOSTAT REPLACEMENT
300X Series Technical Manual 7610-002-64-22
Issued: 07-26-2006 Revised: N/A
29
Pulling the thermostat probe and fitting from the well (Tempstar).
Removing the wires from the thermostat.
5. Attach the jumper wires to the wires that you removed from
the old thermostat.
Attaching the jumper wires.
Advertisement
Table of Contents
