Directed Electronics Viper 5501 Owner's Manual page 25

To activate turbo timer mode with a manual transmission:
1. Enter MTS mode with the door open.
2. Transmit the timer mode feature with the remote by pressing
and then .
3.
the programmed runtime. (The remote start feature is still enabled).
You can still remote start the vehicle after the turbo timer has timed out and shut
off the vehicle. For safety reasons, if a door is opened (while the system is locked
mode and does not remote start until the MTS sequence is re-initiated.
Note: An optional push button can be hard wired to the (-) activation input
without having to use the remote.
When the vehicle is running follow the procedures listed above, but instead of
pressing the remote, press the push button the appropriate number of times to ac-
tivate the remote start (factory setting is for 1 pulse). The remote emits the remote
The car remains running for the pre-programmed amount of time.
© 2008 Directed Electronics. All rights reserved.
two-times,
25