Directed Electronics Viper 5501 Owner's Manual page 23

Timer mode
Command
: Press two-times and then
Feedback
area. The parking lights flash 4 times fast to confirm.
Notes
: Enables or disables the remote start timer mode.
The system must be locked for the timer mode to operate. The system will start
or neutral safety shut-down wires. The remote will respond with the Start and
Timer mode.
To activate timer mode with a manual transmission:
1. Enter the MTS mode.
2.
3. Enter the timer mode. The parking lights quickly flash 4 times to confirm
begins the timer mode sequence.
To exit timer mode with transmitter:
Press twice and then press
To exit timer mode without transmitter:
1. Make sure the remote start system is not operating the engine.
2.
slowly four times.
Note:
and, it can change the intervals between activations in timer mode.
© 2008 Directed Electronics. All rights reserved.
.
. Parking lights flash slowly four times
23