Directed Electronics Viper 5501 Owner's Manual page 21

Remote start keyless entry
Hide thumbs Also See for Viper 5501:
Table of Contents

Advertisement

Command
: Press
one- time and then press
Feedback
:
Screen changes to unlock icon
Notes
:
Unlocks the system without chirps
Overriding the optional starter kill
To bypass the optional starter kill without a remote control:
Use your override switch located on the control center (see diagram below) to
bypass the system. This switch bypasses the system only if you have the vehicle
key.
To check proper operation:
1.
While the vehicle is locked, open the door. Immediately insert the key into
the ignition and turn it to the run or on position (all the indicators in the
dash turn on).
2.
Press and release the Override Switch one time. The optional starter kill is
bypassed. You can now start the vehicle with the key.
Note: The Override Switch feature allows you to select a specific number of
presses needed to unlock the system. If the Override Switch has been pro-
grammed to a new number of presses by your authorized dealer, that number
should be indicated below.
Override Switch Number ___________
© 2008 Directed Electronics. All rights reserved.
.
21

Advertisement

Table of Contents
loading

Table of Contents