Directed Electronics Viper 5501 Owner's Manual page 24

Turbo Timer mode
Turbo timer mode keeps the engine running after arriving at your destination for
a programmable period of 1, 3, 5 or 10 minutes. This allows the system's timer
to conveniently cool down the turbo after you have left the vehicle.
The system monitors the engine speed and will automatically shut the engine off
if the RPMs rise above or fall below the programmed levels. This feature prevents
damage to the motor due to fuel delivery system failures or other problems that
may cause the engine to race
To activate Turbo Timer Mode with an automatic transmission:
1. Make sure the Turbo timer feature is turned on in the features grid.
2. Open the vehicle door.
3. While the vehicle is running; press the
button.
4. The parking lights flash once and the remote plays the remote start activa-
tion tone confirming that the remote start is activated (the one way remote
only flashes the parking lights).
5. Turn off the ignition (car stays running).
6.
At this point the vehicle stays running for the programmed runtime.
24
button twice followed by the
© 2008 Directed Electronics. All rights reserved.