To Enter The Remote Start Safety By-Pass Mode - Audiovox AS-9234 Owner's Manual

DASH MOUNTED PRLED, OR THE OPTIONAL WINDSHEILD
MOUNTED RECEIVERS PUSH-BUTTON SAFETY CONTROL SWITCH.

TO ENTER THE REMOTE START SAFETY BY-PASS MODE:

The Push-Button LED safety control switch allows you to temporarily dis-
able the remote starting function of the system. This recommended when-
ever the vehicle is being serviced. To place the system in the service mode:
1. With the system disarmed/unlocked and the ignition switch off, press
and hold the dash mounter PRLED, or optional push-button switch
found on the glass mounted receiver assembly.
2. Turn the ignition switch on, off, on, off, on, off.
3. The LED begins to flash two short flashes followed by one long flashes
and continues this pattern until returned to normal mode of operation.
This puts the unit into the R/S Override mode indicating that the remote
start is in the service mode and will not start from RF or any other input
CarLink, Posse or otherwise.
Page 16
128-8970a
16 of 20