Paper Misfeed In The Drawer Of The Tandem Large Capacity Feeder; Paper Misfeed In The Bypass Tray - Toshiba E-Studio 557 Manual

1.TROUBLESHOOTING FOR THE HARDWARE
Check that the guide width is correct, there is no
2
folded/curled paper or overloading, and then close
the drawer.
Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides.
 Paper misfeed in the drawer of the tandem large capacity feeder
1 Open the drawer of the tandem large capacity feeder,
and remove the misfed paper.
Check that there is no folded/curled paper or
2
overloading, and then close the drawer of the tandem
large capacity feeder.
Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides.
 Paper misfeed in the bypass tray
1 Pull out the paper misfed on the bypass tray and
place it again.
If a sheet of paper is stained, folded or torn, replace it with a
new one.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed
2
1
19