Assembly; Assembling The Detector - Bounty Hunter Land Ranger Pro Owenrs Manual

ASSEMBLING THE DETECTOR

G
1 Hold S-ROD upright.
G
2 Loosen LOCKING COLLAR on S-ROD;
rotate counterclockwise.
G
3 Insert LOWER STEM into S-ROD with the
SILVER BUTTON pointed upward.
G
4 Rotate the LOWER STEM until the
SILVER BUTTON locates and clicks into
a hole.
S-ROD
S-ROD
G
5 Attach the SEARCHCOIL to the LOWER
STEM using the BOLT and KNURLED
KNOB.
G
6 Adjust the LOWER STEM to a length that
lets you maintain a comfortable upright
posture while holding the detector relaxed
at your side with the SEARCHCOIL
parallel to the ground in front of you.
G
7 Wind the CABLE around the STEM.
Leave slack in the cable at the bottom to
allow the searchcoil to pivot.
G
8 Align the pins on the CABLE PLUG to the
connector holes on the rear of the control
housing.
G
9 Push in CABLE PLUG.
G
1 0 Twist the LOCKING COLLAR fully in the
clockwise direction until stems are locked
securely together.
LOCKING
COLLAR
INTERNAL
CAM LOCK
SILVER BUTTON
LOWER
STEM
LOWER STEM
5