Eptz3000/3000I Function Setup And Operation; Manual Control Mode; Auto Pan Mode; Position Setting - EverFocus EPTZ3000 User Manual

Speed dome

Hide thumbs Also See for EPTZ3000:

Table of Contents

4. EPTZ3000/3000I FUNCTION SETUP AND OPERATION

Manual control: Shift Joystick Up/Down/Left/Right, and turn it

Clockwise/Counterclockwise to control speed dome.

Use the control keys which are Zoom, Focus and IRIS function keys on the

keyboard to zoom In/Out, focus N (near)/F (Far), or IRIS +/-.

HOME Mode: The camera view will go back to the home position when there is no

keyboard operation in a specific time. The home position and the specific time can

be set by pressing Set + Home.

Two point auto pan: Press A.Pan to enter the auto pan mode, and then the

system will ask you to enter the auto pan speed (1~239). Press Enter to start auto

pan.

In order to set the two points, press Set + A.Pan, and then enter the dwell time

(1~239 seconds) of each point.

360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. The camera will

turn 360° automatically, but not tilt.

Focus on a preset position: Press the number key, and then press Position to

focus on the number of preset position; or you can press Position, then enter the

preset position number, and then press Enter to focus on the number of preset

position.

4-34

Table of Contents

Eptz3000i