Advertisement
Step 7: Install Internal Components
Required: 4 (or 5 for JA580) Sear Plates, 3 (or 4 for JA580) Cooking Grates, Warming Rack.
Place the sear plates into the base unit
ensuring that the edges with the "finger
holes" face the grill front. Position the
cooking grates into the base with the
finger holes facing the front. These
may be turned over to provide a flat
surface for delicate foods. Set the
warming rack into the two supports in the
ends of the rear lid. For Model JA580:
To use the rotisserie smoker box, remove
the warming rack, and sit the box and lid
on top of the rotisserie housing.
Step 8: Install the LP Cylinder (LP Models Only - Cylinder Not Included)
Required: LP Gas Cylinder.
NOTE: Refer to the User's Manual for the cylinder
filling requirements, regulator attachment, and leak
testing procedures, before lighting the grill.
Insert the propane (LP) cylinder into the hole provided
into the bottom panel. Connect the cylinder to the
regulator.
Step 9: Side Burner Installation (Model JA580)
See Assembly Instructions Included with the Side Burner Kit.
Sear
plates (4/ 5)
Cooking
grates (3/ 4)
Page 5
JA460/JA580 ASSEMBLY
Warming
rack (1)
Finger
hole
Advertisement
