Samsung SRP-350 Operator's Manual page 9

n = 3 : Error status
Bit Off/On Hex
0 Off 00
1 On 02
2 - -
3 Off 00
On 08
4 On 10
5 Off 00
On 20
6 Off 00
On 40
7 Off 00
Bit 3: If these errors occur due to paper jams or the like, it is possible to
recover by
correcting the cause of the error and executing DLE ENQ n(1 ≤ n ≤ 2).
If an error due to a circuit failure (e.g. wire break) occurs, it is impossible
to
recover.
Bit 6: When printing is stopped due to high print head temperature until the print
head temperature drops sufficiently or when the paper roll cover is open
during printing, bit 6 is On.
n = 4 : Continuous paper sensor status.
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
3 On 0C
4 On 10
5 Off 00
6 On 60
7 Off 00
DLE ENQ n
[Name] Real-time request to printer.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤ n ≤ 2
[Description] Recover from an error and restart printing from the line where the error
occurred
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
- Undefined.
0 No auto-cutter error.
8 Auto-cutter error occurs.
16 Not used. Fixed to On.
0 No unrecoverable error.
32 Unrecoverable error occurs.
0 No auto-recoverable error.
64 Auto recoverable error occurs.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to off.
2 Not used. Fixed to On.
0 Paper roll near-end sensor. Paper adequate.
12 Paper near-end is detected by the paper roll
near-end sensor.
16 Not used. Fixed to On.
0 Not roll end sensor. Paper present.
96 Paper is detected by the paper roll end
sensor.
0 Not used. Fixed to Off.
DLE ENQ
10 05
16 5
n
n
n