[Format] Ascii Esc Hex 1B Decimal; [Format] Ascii Esc Hex Decimal [Range] - Samsung SRP-350 Operator's Manual

0, 48 Left justification
1, 49 Centering
2, 50 Right justification
ESC c 3 n
[Name] Select paper sensor(s) to output paper end signals.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) to output paper end signals.
Each bit of n is used as follows:
Bit Off/On Hex
0 Off 00
On 01
1 Off 00
On 02
2 Off 00
On 04
3 Off 00
On 08
4 – 7 - -
ESC c 4 n
[Name] Select paper sensor(s) to stop printing.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is
detected, using n as follows:
Bit Off/On Hex
0 Off 00
On 01
1 Off 00
On 02
2-7 - -
ESC c 5 n
[Name] Enable/Disable panel buttons.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Enables or disables the panel buttons.
ESC c 3
1B 63 33
27 99 51
Decimal Function
0 Paper roll near-end sensor disabled.
1 Paper roll near-end sensor enabled.
0 Paper roll near-end sensor disabled.
2 Paper roll near-end sensor enabled.
0 Paper roll end sensor disabled.
4 Paper roll end sensor enabled.
0 Paper roll end sensor disabled.
8 Paper roll end sensor enabled.
- Undefined.
ESC c 4
1B 63 34
27 99 52
Decimal Function
0 paper roll end sensor disabled.
1 Paper roll end sensor enabled.
0 Paper roll end sensor disabled.
2 Paper roll end sensor enabled.
- Undefined.
ESC c 5
1B 63 35
27 99 53
When the LSB is 0, the panel buttons are enabled.
n
n
n
n
n
n
n
n
n