Samsung SRP-350 Operator's Manual page 20

Decimal
[Range] 0 ≤ n ≤ 255
(1 ≤ vertical number of times ≤ 8, 1 ≤ horizontal number of times ≤ 8)
[Description] Selects the character height using bits 0 to 2 and selects the character
width
using bits 4 to 7, as following:
Bit Off/O Hex
n
0-3 Character height selection. See Table 2
4-7 Character width selection. See Table 1
Table 1
Character Width Selection
Hex Decimal Width
00 0 1(normal)
10 16 2(double-width)
20 32 3
30 48 4
40 64 5
50 80 6
60 96 7
70 112 8
GS $ nL nH
[Name] Set absolute vertical print position in page mode
[Format] ASCII
Hex
Decimal
[Range] 0•nL•255,
[Description] Sets the absolute vertical print starting position for buffer character
data
in page mode.
This command sets the absolute print position to [(nL + nH x 256) x
(vertical or horizontal motion unit)] inches.
GS ς x y d1...d(x × y × 8)
[Name] Define downloaded bit image.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48
x x y ≤ 1536
0 ≤ d ≤ 255
[Description] Defines a downloaded bit image using the dots specified by x and y.
x indicates the number of dots in the horizontal direction.
y indicates the number of dots in the vertical direction.
29 33 n
Decimal Function
Hex
00
01
02
03
04
05
06
07
GS $ nL
1D 24 nL
29 36 nL
0•nH•255
GS ς x
1D 2A x
29 42 x
Table 2
Character Height Selection
Decimal Height
0 1(normal)
1 2(double-height)
2 3
3 4
4 5
5 6
6 7
7 8
nH
nH
nH
y d1...d(x × y × 8)
y d1...d(x × y × 8)
y d1...d(x × y × 8)