Samsung SRP-350 Operator's Manual page 19

FS p n m
[Name] Print NV bit image
[Format] ASCII
Hex
Decimal
[Range] 1 ≤ n ≤ 255
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] Prints a NV bit image n using the mode specified by m.
M Mode Vertical dot Density (DPI)
0.48 Normal 180
1.49 Double-width 180
2.50 Double-height 90
3.51 Quadruple 90
n is the number of the NV bit image (defined using the FS q
command).
m specifies the bit image mode.
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name] Define NV bit image
[Format] ASCII
d1...dk]n
xH yL yH d1...dk]n
Decimal
d1...dk]n
[Range] 1 ≤ n ≤ 255
0 ≤ xL ≤ 255
0 ≤ xH ≤ 3(when 1 ≤ (xL + xH x 256) ≤ 1023
0 ≤ yL ≤ 3(when 1 ≤ (yL + yH x 256) ≤ 288
1 ≤ d ≤ 255
k = (xL + xH x 256) x (yL + yH x 256) x 8
Total defined data area = 2M bits (256K bytes)
[Description] Define the NV bit image specified by n.
n specifies the number of the defined NV bit image.
xL, xH specifies (xL + xH x 256) x 8 dots in the horizontal direction for
the NV bit image you are defining.
yL, yH specifies (yL + yH x 256) x 8 dots in the vertical direction for
the
NV bit image you are defining.
GS ! n
[Name] Select character size.
[Format] ASCII
Hex
When the LSB is 0, upside-down printing mode is turned off.
When the LSB is 1, upside-down printing mode is turned on.
FS p n
1C 70 n
28 112 n
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH
Hex 1C 71
28 113 n [xL xH yL yH d1...dk]1...[xL xH yL yH
GS ! n
1D 21 n
m
m
m
Horizontal Dot Density (DPI)
180
90
180
90
n [xL xH yL yH d1...dk]1...[xL