Samsung SRP-350 Operator's Manual page 11

ESC $ nL nH
[Name] Set absolute print position.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Set the distance from the beginning of the line to the position at which
subsequent characters are to be printed.
The distance from the beginning of the line to the print position is [(nL
+
nH x 256) x (vertical or horizontal motion unit)] inches.
ESC i
[Name] Cuter
[Format] ASCII
Hex
Decimal
ESC % n
[Name] Select/Cancel user-defined character set.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Selects or cancels the user-defined character set.
canceled.
selected.
ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
[Name] Define user-defined characters.
[Format] ASCII
× xk)]
Hex
xk)]
Decimal
xk)]
[Range] y = 3
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ x ≤ 12 Font A (12 × 24)
0 ≤ x ≤ 9
0 ≤ d1 ... d(y × xk) ≤ 255
[Description] Defines user-defined characters.
y specifies the number of bytes in the vertical direction.
and c2
specifies the final code.
ESC $ nL
1B 24 nL
27 36 nL
ESC i
1B 73
27 105
ESC % n
1B 25 n
27 37 n
When the LSB of n is 0, the user-defined character set is
When the LSB of n is 1, the user-defined character set is
ESC & y c1
1B 26 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y ×
27 38 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y ×
Font B (9 × 17)
c1 specifies the beginning character code for the definition,
x specifies the number of dots in the horizontal direction.
nH
nH
nH
c2 [x1 d1...d(y × x1)]...[xk d1...d(y