Samsung SRP-350 Operator's Manual page 8

DLE EOT n
[Name] Real-time status transmission.
[Format] ASCII
Hex
Decimal
[Range] 1 ≤ n ≤ 4
[Description] Transmits the selected printer status specified by n in real time, according
to
the following parameters:
n = 1 : Transmit printer status.
n = 2 : Transmit off-line status.
n = 3 : Transmit error status.
n = 4 : Transmit paper roll sensor status.
n = 1 : Printer status.
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
On 04
3 Off 00
On 08
4 On 10
5-6 - -
7 Off 00
n = 2 : Off-line status.
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
On 04
Off 00
3
On 08
4 On 10
5 Off 00
On 20
6 Off 00
On 40
7 Off 00
Bit 5 : Becomes on when the paper end sensor detects paper end and printing stops.
DLE EOT n
10 04 n
16 4 n
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
0 Drawer open/close signal is LOW
(connector pin 3).
4 Drawer open/close signal is HIGH
(connector pin 3).
0 On-line.
8 Off-line.
16 Not used. Fixed to On.
- Undefined.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to off.
2 Not used. Fixed to On.
0 Cover is closed.
4 Cover is open.
0 Paper is not being fed by using the PAPER
FEED button.
8 Paper is being fed by the PAPER FEED
button.
16 Not used. Fixed to On.
0 No paper-end stop.
32 Printing stops due to paper end.
0 No error.
64 Error occurs.
00 Not used. Fixed to Off.