Samsung SRP-350 Operator's Manual page 10

ESC FF
[Name] Print data in page mode
[Format] ASCII
Hex
[Description] In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name] Set right-side character spacing.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Sets the character spacing for the right side of the character to [n x
horizontal or vertical motion units].
ESC ! n
[Name] Select print modes.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Description] Selects print mode(s) using n as follows:
Bit Off/On Hex
0 Off 00
On 01
1 - -
2 - -
3 Off 00
On 08
4 Off 00
On 10
5 Off 00
On 20
6 - -
7 Off 00
On 80
ESC FF
1B 0C
Decimal 27
ESC SP n
1B 20 n
27 32 n
ESC ! n
1B 21 n
27 33 n
Decimal Function
0 Character font A (12 × 24)
1 Character font B (9 × 17)
- Undefined.
- Undefined.
0 Emphasized mode not selected.
8 Emphasized mode selected.
0 Double-height mode not selected.
16 Double-height mode selected.
0 Double-width mode not selected.
32 Double-width mode selected.
- Undefined.
0 Underline mode not selected.
128 Underline mode selected.
12