4-3.Adjustment Using The Pc; 4-3-1.Setting Up The Adjustment Software - FujiFilm FinePix 2600Zoom Service Manual

4. Adjustment and Inspection
4-3. Adjustment Using the PC
4-3-1. Setting up the Adjustment Software
* As the initial setup is included in the FFW217.ini file, follow the
procedure described below. Note that the software will not
run if the file name is changed.
* As steps 3~6 in initial setup are included in the FFW217.ini file, all
that is required is to verify details.
* Do not alter the user program (FX2600Z_UE) under any cir-
cumstances. The software will not run if it has been altered
in any way.
<Step 1>
Double-click on the executable file FFW217.exe (Fig.D-(1)) to
display the FFW Start-up Screen (Fig.E).
<Step 2>
Select the Setting menu (Fig.F-(1)) from the menu bar on the
Menu screen, and then select Mode setting (Fig.F-(2)).
<Step 3>
Select the EVR menu (Fig.G-(1)) from the Customize dialog
screen, and setup as follows (Fig.G-(2)).
Item
etc (-V2)
LANC page
<Step 4>
Select the Etc menu (Fig.H-(1)) from the Customize dialog
screen, and setup as follows (Fig.H-(2)).
Item
Number of automatic measurements
Enable mode change
Use Japanese fonts
(2)
<Fig.H> Etc Dialog Box Screen
18
Setup details
Use ( = check)
Use ( = check)
Setup details
0
No check ( = un used)
No check ( = un used)
(1)
fx2600z_ue
Apply
FinePix2600Zoom (U/E/EG) SERVICE GUIDE
<Fig.E> FFWJ217.EXE Start-up Screen
(1)
<Fig.F> Mode Setting Select Screen
<Fig.G> EVR Dialog Box Screen
fx2600z_ue
(2)
fx2600z_ue
(1)
fx2600z_ue
Apply
(2)