L ] : Lcd Adjustment - FujiFilm FinePix 2600Zoom Service Manual

FinePix2600Zoom (U/E/EG) SERVICE GUIDE

4-3-3.[ L ] : LCD Adjustment

<Preparation>
Please start the adjustment absolutely after setting
[LCD adjustment standard card (SSFDC)] in the cam-
era when you execute the LCD adjustment.
(=[LCD adjustment standard card (SSFDC)] is set at
the [start screen (Figure 2)].)
<Step1>
[L] is selected from the adjustment item select screen
(Figure 3). (=[L] of the keyboard of PC is pressed.)
--->The [LCD adjustment screen (Figure 4)] displays.
<Step2>
The [LCD brightness adjustment image (Figure 5)] is
selected according to the screen instruction on PC.
(=The [LCD brightness adjustment image (Figure 5)] is
selected by pressing key (6 or 4) to PC.)
(Note)
The image contents included on the standard
card are as shown below.
File Name
DSC00001.jpg
DSC00002.jpg
DSC00003.jpg
DSC00004.jpg
DSC00005.jpg
DSC00006.jpg
--->The picture for the LCD brightness adjustment is
displayed.
<Step3>
The step in the right and left gray bar in the adjustment
picture is adjusted to be able to do the identification
confirmation according to the screen instruction on
PC.(=Numeral key (8 or 2) to PC is pressed, and do the
adjustment of brightness.)
<Step4>
When the adjustment is completed, the adjustment data is
fixed by pressing [Enter Key] of PC.
--->The adjustment data is written in Flash_ROM.
--->The [LCD adjustment end screen(Figure 6)] displays.
<Step5>
After pressing the [Enter key], the system returns to the
Adjustment Items Select Screen.
Proceed with any other necessary adjustments.Always
select [E]:End Setting to complete adjustment
(see P27/28 for details).
Image Contents
Gray Chart
Monoscope
Full White
Full Black
Brightness adjustment chart
Natural Picture
4. Adjustment and Inspection
<Fig.4> LCDadjustment screen
<Fig.5> Picture for LCD brightness adjustment
<Fig.6> LCD adjustment end screen
Step of gray bar
21