FujiFilm FinePix 2600Zoom Service Manual page 28

4. Adjustment and Inspection
FinePix2600Zoom (U/E/EG) SERVICE GUIDE
<Step3>
Enter key of PC is pressed.
--->The [repair base select screen(Figure 24)] displays.
<Step4>
Each repair base is selected from the keyboard of PC on
the repair base selection screen.
--->The camera is automatically returned to the product
mode.
--->The adjustment data is written in Flash_ROM.
--->The [FinePix2600Zoom adjustment end screen(Figure
25)] displays.
<Fig.24> repair base select screen
1) When all the adjustments end, DC_JACK is pulled out
from the camera.
2) The adjustment software is ended.
<Fig.25> FinePix2600Zoom adjustment end screen
28