Basic Settings - Panasonic WJ-ND400K Quick Reference Manual

■ User interface on the operation window
w e
q
o
i

■ Basic settings

Configure the minimum required settings to operate the recorder.
1. Set the current time
Click the [Setup] button, and then click
the [Quick] button.
Set the current time and date.
Click the [Set] button just below the
"Time & date" setting.
2. Register cameras
Select a port to which cameras are
connected to detect them.
Determine how to assign and register
an IP address of the detected camera.
Click the [Registration] button, and then
click the [OK] button.
Check the registration results, and then
click the [OK] button.
3. Program
When the camera registration is com-
plete, the recording rate for the live
image transmission and manual record-
ing on the "Program" page will automati-
cally be set to "1 ips".
Click the [Display] button to check the
detailed settings of "Program".
r t
→ The "Quick" page will be displayed.
→ Select the camera port or the client
PC port.
→ Select [Register the IP address
automatically given by this unit to a
detected camera] or [Register the
IP address set with a detected
camera].
→ The "Camera registration result"
window will be displayed after the
registration is complete.
→ Up to 64 cameras can be registered.
• When the desired camera is not
detected or when the settings of a
camera are required to be
changed, configure the settings on
the "NW camera" page.
q [Control] button: Search and play recorded images,
switch the camera channels, etc.
w [Cam. Select] button: Select the camera channel from
which images are to be displayed.
e [Setup] button: Configure the settings of the recorder.
r Status display area: The status of the recorder such as
y
the recording status, playback status, etc. will be displayed.
t Current time display area: The current time will be dis-
played.
y Image display area: Live images/recorded images will be
displayed.
u Playback point operation area: Designate a point to be
u
played or play the latest recorded image.
i [HDD] tab: Control playback operation.
o [CAM] tab: Control the camera operation (zoom, focus,
auto function, etc.).