Monitor Live Images; Control Cameras; Manual Recording - Panasonic WJ-ND400K Quick Reference Manual

■ Monitor live images

Display live images on a 1-screen or on a 4-screen (multiscreen).
Click the [Cam. Select] button.
Click the "WJ-ND400" icon, the group
title and the camera title in order.
Click the [Multiscreen select] button.
Display live images from the cameras sequentially (sequential display).
Click the [Cam. Select] button, and then
click the [Sequence] button.
Click the [Sequence] button again.

■ Control cameras

It is possible to operate cameras with the panning/tilting function on the [CAM] tab.
q [Zoom]: Zoom in/out the displayed image.
w [Focus]: Adjust the focus point.
e [Auto mode]: Activate the designated auto function of the camera.
r Control buttons: Adjust the camera direction.
Control pad: Panning/tilting speed will be faster if a clicked point
gets farther from the center point of the control pad.
t [Brightness]: Adjust the lens iris (brightness).
y [Preset]: Move the camera to the registered preset position.

■ Manual recording

It is possible to record images manually.
Click the [▲] button in the [REC] box on
the [HDD] tab.
Click the recording button
Click the recording stop button
(yellow).
→ A list of the registered cameras will
be displayed in the [Cam. Select]
box.
→ Live images from the selected cam-
era channel will be displayed on a
1-screen.
→ Live images from the cameras (regis-
tered as a group) will be displayed on
a 4-screen.
• Each time the [Multiscreen select]
button is clicked, live images from
the registered camera groups will be
displayed.
→ Live images from the cameras will
be displayed sequentially.
• The indicator on the [Sequence]
button will light green and the "SEQ"
indication will be displayed in the
status display area.
→ The indicator on the [Sequence]
button will go off and the sequential
display of live images will stop.
→ Repeat clicking the [▲] button until
the [Recording] button and the
[Recording stop] button are dis-
played.
→ Recording will start and the [REC]
(red).
indicator in the status display area
will light red.
→ Recording will stop and the [REC]
indicator in the status display area
will disappear.
[CAM] tab
q e
w
r t
y