*2 : It can be set from the setup menu. However, if the setup menu and the adjustment control of the RM-P9 are used at the same time, the setup value may
not be reflected correctly.
*3 : However, the adjustment items that are set to the absolute mode by the RM configuration menu and the TEST signal output ON/OFF , cannot be changed
from the setup menu if RM-B150 is set to the panel-active.
*4 : It can be allocated to the respective adjustment controls on the RM-B150 using the RM configuration menu.
However, if some items are set to the absolute value mode by the RM configuration menu, the corresponding adjustment items cannot be changed from