Sony DIGITAL BETACAM DVW-707 Maintenance Manual page 51

No. Page Item
24 LEVEL 7 R BLACK
G BLACK
B BLACK
R FLARE
G FLARE
B FLARE
FLARE
TEST OUT
25 LEVEL 8 GAMMA TABLE
MASTER GAMMA
R GAMMA
G GAMMA
B GAMMA
BLACK GAMMA
RANGE
MASTER BLACK
GAMMA
R BLACK GAMMA
G BLACK GAMMA
B BLACK GAMMA
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1
Setup Description
X ([0]) Adjusts the black level of the R signal.
X ([0]) Adjusts the black level of the G signal.
X ([0]) Adjusts the black level of the B signal.
X ([0]) Adjusts the flare correction of the R channel.
X ([0]) Adjusts the flare correction of the G channel.
X ([0]) Adjusts the flare correction of the B channel.
[ON]/OFF
Turns ON/OFF the flare correction circuit.
[ENC]/R/G/B
Sets the type of the video signal output from the TEST OUT connector.
(Same as TEST OUT item of the "FUNCTION 1/2" page.)
[A]/B/C/D/F
Selects the gamma table.
Output level
A : Gamma of x:y = 1:4
B : Gamma of x:y = 1:5
C : Gamma of x:y = 1:4.5
D : Gamma of x:y = 1:0.7
F : Gamma kine film
X ([0]) Adjusts the master gamma correction curve.
X ([0]) Adjusts the gamma correction curve of the R channel.
X ([0]) Adjusts the gamma correction curve of the G channel.
X ([0]) Adjusts the gamma correction curve of the B channel.
LOW/MID/[HI] Sets the range in which black gamma works
LOW : 0 to 7.2 %
MID : 0 to 14.4 %
HI : 0 to 28.8 %
X ([0]) Adjusts the master black gamma correction.
X ([0]) Adjusts the black gamma correction of the R channel.
X ([0]) Adjusts the black gamma correction of the G channel.
X ([0]) Adjusts the black gamma correction of the B channel.
3-1. Engineer Mode (Setup Menu)
y
x (3%)
Input level
3-9