Parts Diagram - Salton SEM10 Instructions And Warranty Information

21. Always operate the appliance on a smooth, even, stable surface. Do not place
the unit on a hot surface.
22. Ensure that the switch is in the "Off" position after each use.
23. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
24. In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this machine.
25. The external surfaces of this unit get hot. Please only touch the handles or knobs
during use and when plugged in.
26. CAUTION: The unit is under pressure when in use. DO NOT remove the boiler
cap until pressure is completely relieved. See the section on CAUTION:
PRESSURE.

PARTS DIAGRAM

1. Water tank boiler cap
2. Steam selector control knob
3. Indicator light
4. Filter holder set (with cup inside)
5. Carafe set
6. Warm plate
7. Brew head
8. Frothing tube
9. Carafe lid
10. Boiler
11. Reservoir plate
12. Base
4