Download Print this page

Description Of Parts; Before First Use - Salton FC-120E Manual

Electronic coffee machine

Advertisement

DESCRIPTION OF PARTS

1) Water Reservoir Lid
2) Filter Basket Holder
3) Filter Basket (inside of Holder)
4) Main Housing
5) Water Level Window
6) Keep Warm Plate
7) Carafe
8) Carafe Water Level Markings
9) Digital Clock Display
10) Hour Advance Button
11) Minute Advance Button
12) Delay Brew Button
13) Start/Stop Button
14) Delay Brew Indicator Light
15) On/Off Indicator Light

BEFORE FIRST USE

Wash the Carafe, Lid and Filter Basket in warm soapy water. Rinse thoroughly
and dry. Wipe the base of the unit with a soft damp cloth. Do not immerse base
in water or any other liquid.
Prior to brewing coffee for the first time run the machine with water only. Follow
the directions in the HOW TO USE section omitting the coffee and coffee filter.
HOW TO USE
1) Plug into a 120 Volt AC outlet.
2) Swing the Filter Basket Holder outward to the left. Place a #4 cone-shaped
paper filter, a permanent filter (SwissGold model KF-4 or a Jasi Goldtone
model KF-4T) in the Filter Basket. Fill the coffee filter with the desired
amount of ground coffee. See Recommended Amount of Coffee chart below.
NOTE: Use coffee ground specifically for automatic drip coffee makers.
3) Close the Filter Basket Holder and snap into place. NOTE: If the door does
not close completely, check to see that the Filter Basket is properly seated in
the Filter Holder then snap the door into place.
4) Fill the carafe with cold water for the desired amount of cups of coffee.
NOTE: Do not make less than 4 cups. Open the Water Reservoir Lid and
pour the water from the Carafe. Close the Water Reservoir Lid. NOTE: Use
only cold water.
5) Place the Carafe with Lid on the Keep Warm Plate. NOTE: The Lid must be
placed on the Carafe.

Advertisement

loading