Cleaning And Maintenance - Salton SEM10 Instructions And Warranty Information

SOME COFFEE FLAVOUR IDEAS TO TRY:
San Francisco Cappuccino
espresso, hot steamed chocolate,
brandy, topped with whipped cream
and cinnamon
Café Irish
espresso, Irish whiskey, topped with
whipped cream
Café Tuaca
espresso, tuaca liqueur, topped with
whipped cream
Café Vienna
espresso, brandy, topped with
whipped cream
PROBLEM SOLVING:
Problem
Coffee does not come out There is no water in the tank;
Coffee comes out too
quickly
Coffee comes out around
the edge of the filter holder
No steam is generated
Coffee is splattering out of
spout
Milk is not foamy after
frothing

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning. Ensure that the speed control is set to "0ff".

Gently pull the steaming tube down to remove it. Wash the tube well. Should the
nozzle of the steaming tube still require cleaning, it can be removed by turning the
Café Tia Maria
espresso, Tia Maria liqueur topped
with frothed milk
Café Grand Mariner
espresso, Grand Mariner liqueur,
topped with whipped cream and grated
orange peel
Mexican Café
espresso, Kahlua, tequila, topped with
frothed milk or cream
Café Romano
espresso, brandy and lemon twist
Causes
The coffee grind is too fine;
There is too much coffee in the filter cup;
The boiler cap is not secure, steam is escaping;
The machine is not plugged in or is not turned on.
The coffee grind is too coarse;
There is not enough coffee in the filter cup.
The filter holder is not inserted in the brew head properly;
There are coffee grounds around the filter basket rim.
There is too much coffee in the filter cup.
The coffee has been packed too tightly.
The water tank is empty.
There is too much water in the tank, no room for steam;
The machine is not plugged in or is not turned on.
The water tank is empty or low, not enough pressure.
The unit ran out of steam.
8