AutoDome Junior HD
WARNING!
The indoor AutoDome Junior IP or HD camera models can
accept power from the 24 VAC power input or from the
Ethernet input. Ensure that the camera receives power from
only one source.
Refer to Section 8.3 Ethernet Connection (IP models), page 52,
for more information about connecting Power over Ethernet.
NOTICE!
Use certified / Listed Class 2 power supply transformer only.
8.2.1
Power Connections to Indoor Cameras
WARNING!
The indoor AutoDome Junior IP or HD models can accept power
from the 24 VAC power input or from the Ethernet input.
Ensure that the camera receives power from only one source.
Refer to Section 8.3 Ethernet Connection (IP models), page 52,
for more information about connecting Power over Ethernet.
Figure 8.1 Power Cable
Ref. # Wire
1
2
3
NOTICE!
The camera unit accepts 24 VAC, 1.2 A power only. Do not
connect 120 V or 230 V to this camera.
Bosch Security Systems, Inc.
24 VAC
24 VAC
User-supplied Power Supply
Installation Manual
Preparing the Wiring | en
Color
Red
Black
n/a
F.01U.172.910 | 4.0 | 2011.09
51