Table of Contents
Advertisement
80
en | Configuring the AutoDome Junior HD
Starting Configuration
Navigation
1.
2.
Making Changes
Each configuration screen shows the current settings. You can
change the settings by entering new values or by selecting a
predefined value from a list field.
CAUTION!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current
field. Changes in any other fields are ignored.
12.1
Basic Mode: Device Access
Camera name
You can give the AutoDome Junior HD a name to make it easier
to identify. The name makes the task of administering multiple
units in larger video monitoring systems easier, for example
using the Bosch Video Management System programs.
The device name is used for the remote identification of a unit,
in the event of an alarm for example. For this reason, enter a
name that makes it as easy as possible to quickly identify the
location.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal
recording management and may therefore result in the Player or
Archive Player being unable to play back the recording.
F.01U.172.910 | 4.0 | 2011.09
Click the SETTINGS link in the upper section of the
window. The Web browser opens a new page with the
configuration menu.
Click one of the menu items in the left window margin. The
corresponding submenu is displayed.
Click one of the entries in the submenu. The Web browser
opens the corresponding page.
After each change, click Set to save the change.
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
