Table of Contents
Advertisement
52
en | Preparing the Wiring
8.2
Power Connections
The HD Conference Dome is available as an indoor model only.
Power to the camera in all indoor models is supplied either via
a single 24 VAC isolated power connector or via a Power over
Ethernet + (PoE+, IEEE 802.3at, class 4) connection using the
existing CAT 5E Ethernet cable.
WARNING!
The HD Conference Dome models can accept power from the
24 VAC power input or from the Ethernet input. Ensure that the
camera receives power from only one source.
Refer to Section 8.5 Ethernet Connection, page 55, for more
information about connecting Power over Ethernet.
NOTICE!
Use certified / Listed Class 2 power supply transformer only.
8.2.1
Power Connections to Indoor Cameras
WARNING!
The HD Conference Dome can accept power from the 24 VAC
power input or from the Ethernet input. Ensure that the camera
receives power from only one source.
Refer to Section 8.5 Ethernet Connection, page 55, for more
information about connecting Power over Ethernet.
Figure 8.1 Power Cable
Ref. # Wire
1
2
3
F.01U.265.806 | 1.0 | 2012.03
24 VAC
24 VAC
User-supplied Power Supply
Installation Manual
HD Conference Dome
Color
Red
Black
n/a
Bosch Security Systems, Inc.
Advertisement
Table of Contents
