Moving The Network Card To A Different Slot - NETGEAR GA 620 Reference Manual

GA620/620T.Manual.R2 6/12/00
8. Insert the Model GA620/GA620T Gigabit Ethernet Card Driver and
Documentation CD into the CD-ROM drive in your PC when prompted.
9. Type the path to the driver that matches your system, and then click on OK.
For example, enter the following path:
In this example, the letter e: is the CD-ROM drive.
The system copies the appropriate files from the CD-ROM.
10. Click on Close in the Network Window when the copying process is complete.
11. Click on Yes when asked if you want to restart your computer.
The system restarts using the new driver and configuration settings.

Moving the Network Card to a Different Slot

Before moving your Model GA620 Gigabit Ethernet Card to a different slot in
the same system, you must first remove the card driver software. After removing
the driver software, you can move the card to a different slot and reinstall the
driver software.
To remove the driver software:
1. Start your Windows NT system and log in.
You must have Network Administrator privileges to remove the driver software.
2. Click on Start from the Windows desktop menu; select Settings and then
Control Panel.
The Control Panel window opens.
3. Double-click on the Network icon.
The Network window opens.
1:55 PM Page 31
e:\
windows nt driver software 3-9