Installing The Optional External Diversity Antenna - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Installing the Optional External Diversity Antenna

The optional Motorola External Diversity Antenna is designed to provide an indoor operating range with
enabled of at least:
Distance
30 meters (100 feet)
50 meters (165 feet)
75 meters (230 feet)
95 meters (300 feet)
The maximum wireless operation distance depends on the type of materials through which the signal must pass
and the location of the diversity antennas
all supported distances in all environments.
To install the optional Motorola External Diversity Antenna:
1
Be sure the SBG1000 is unplugged. As with all electronic equipment, avoid potential shock by always
unplugging the power cord from the wall outlet or other power source before disconnecting it from the
SBG1000 rear panel.
2
Remove the antennas on the SBG1000 by unscrewing the connectors. You may need a pair of needle nose
pliers to loosen them.
Store the antennas supplied on the SBG1000 in a safe place.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Data Transfer Rate
11 Mbps
5.5 Mbps
2 Mbps
1 Mbps
and clients
X
28
Exit
FAQ
(stations). Motorola cannot guarantee wireless operation for
SBG1000 Wireless Cable Modem Gateway User Guide
Specifications Glossary License
WEP