Gateway > Lan - Dhcp Server Config Page - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact
Gateway > LAN — dhcp server config Page
Experienced network administrators only can use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — advanced page fields
Field Description
LAN IP Address The SBG1000 LAN IP address, in
LAN IP Subnet Mask The
Starting IP Address Sets the starting IP address assigned by the
dotted-decimal format. The default is 192.168.0.2.
# of DHCP Users Sets the number of clients for the
There are 253 possible client addresses. The default is 253.
DHCP Server Lease Sets the time in seconds that the
Time default is 60 seconds.
Domain Name Sets the
Time To Live Sets the
Interface Maximum Sets the SBG1000 LAN MTU, in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Transmission Unit
Apply Click to apply your changes. You must reboot the
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
subnet mask, in dotted-decimal format. The default is 255.255.255.0.
domain name for the SBG1000 LAN. The default is None.
TTL (hop limit) for outbound packets. The default is 64.
X
50
Exit
FAQ Specifications Glossary License
dotted-decimal format. The default is 192.168.0.1.
SBG1000
DHCP server to clients, in
SBG1000
DHCP server to assign a private IP address.
SBG1000
DHCP server leases an IP address to a client. The
SBG1000
SBG1000 Wireless Cable Modem Gateway User Guide
.