Installing The Optional External Diversity Antenna - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Installing the Optional External Diversity Antenna

The optional Motorola External Diversity Antennas are designed to provide an indoor operating range with
enabled of at least:
Distance Data Transfer Rate
30 meters (100 feet) 11 Mbps
50 meters (165 feet) 5.5 Mbps
75 meters (230 feet) 2 Mbps
95 meters (300 feet) 1 Mbps
The maximum wireless operation distance depends on the type of materials through which the signal must pass
and the location of the diversity antennas
all supported distances in all environments.
To install the optional Motorola External Diversity Antenna:
1
Be sure the SBG1000 is unplugged. As with all electronic equipment, avoid potential shock by always
unplugging the power cord from the wall outlet or other power source before disconnecting it from the
SBG1000 rear panel.
2
Remove the antennas on the SBG1000 by unscrewing the connectors. You may need a pair of needle nose
pliers to loosen them.
Store the antennas supplied on the SBG1000 in a safe place.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
and clients
X
28
Exit
FAQ Specifications Glossary License
(stations). Motorola cannot guarantee wireless operation for
SBG1000 Wireless Cable Modem Gateway User Guide
WEP