Control & Connectors; Top Panel - Yaesu FTA-310 Operating Manual

Yaesu fta-310 air band transceiver operating manual
Table of Contents

Advertisement

Antenna Jack
This BNC connector accepts the supplied flexible
antenna, or another antenna designed to provide 50
 impedance on the Aircraft Communication Band.
MIC/EAR Jack
You may connect the supplied CT-96 Headset Cable
or the (optional) MH-44
to this jack. To use this jack, you must first remove
the plastic cap by rotating it counter-clockwise, then
lifting it away from the transceiver body.
Do not allow the FTA-310 to become sub-
merged in water while the plastic cover
over the MIC/EAR jack is removed.
FTA-310 O
perATing
c
& c
ontrols
onnectors
Speaker/Microphone
B4B
M
AnuAl
( t
)
p
op
anel
 
POWER/VOLUME (Inner) Knob
Turn this (inner) control clockwise to turn the radio
on and to increase the volume. Counterclockwise
rotation into the click-stop will turn the radio off.
Pressing this knob downward momentarily selects
the tuning methods among the VFO (Variable Fre-
quency Oscillator), MR (Memory Recall), BOOK
(Pre-Programmed Memories), and WX (Weather
Channel Memories) modes.
Note: The WX mode is available in the USA ver-
sion only.
DIAL Selector (Outer) Knob
This (outer) 20-position detented rotary switch tunes
the operating frequency or selects the memory chan-
nels.
 
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents