The FTA-310 also provides for adjustment of the
"Hang-Time" of the VOX system (the transmit-receive
delay after the cessation of speech) via the Menu. The
default delay is 1.0 second. To set a different delay time:
Press the [ F ] key, then press downward on the VOL-
UME knob to activate the Menu ("SET") mode.
Rotate the DIAL selector
knob to select Menu Item 22
"VDLY."
P r e s s d o w n w a r d o n t h e
VOLUME knob to enable adjustment of this Menu
item.
Rotate the DIAL selector knob to select the delay
time among "05," "10," "15," and "20" (repre-
senting 0.5, 1.0, 1.5, and 2.0 sec).
When you have made your selection, press down-
ward on the VOLUME knob to save the new setting,
and then press the PTT switch to exit to normal op-
eration.
26
a
o
dvanced
peratIon
PA Operation
The PA mode allows the FTA-310 to be used as a Pub-
lic Address System when an optional MH-44
phone or other Headset/Microphone is connected.
Press and hold in the
[ USER ] key for 2 sec-
onds to activate the PA
mode.
Speak through the mi-
crophone while press-
ing and hold in the PTT
switch on the microphone or headset/microphone.
The "Course Deviation Nee-
dle" will defect in accordance
with the voice level. Rotate
the VOLUME knob to con-
trol the audio output level.
To exit the PA mode, press and hold in the [ USER ]
key again.
The FTA-310 provides for customization of the voice
monitor feature via the Menu while using a Headset. To
select the monitor configuration:
Press the [ F ] key, then press downward on the VOL-
UME knob to activate the Menu ("SET") mode.
FTA-310 O
perATing
Micro-
B4B
M
AnuAl