Yaesu FTA-310 Operating Manual page 53

14 [ TEMP ]
Function: Correcting the thermometer setting.
Available Values: –127 ~ +127 (x0.1 °C)
Default Setting: 000 (ºC)
This allows you to calibrate the internal thermometer
with a known-to be-accurate source.
15 [ UNIT ]
Function: Selects the measurement units for the tem-
perature sensor.
Available Values: °F/°C
Default Setting: °F
16 [ TOT ]
Function: Setting of the Time-Out Timer countdown
time.
Available Values: 1/3/5/oFF (minutes)
Default Setting: oFF
The Time-Out Timer shuts off the transceiver after con-
tinuous transmission exceeds the programmed time.
17 [ DIMM ]
Function: Setting of the display brightness level.
Available Values: LV1 ~ LV4
Default Setting:LV3
FTA-310 O
perATing
( "s
m
enu
M
AnuAl
" ) m
et ode
18 [ KEY1 ]
Function: Programming the primary (momentary press
mode) [ USER ] key assignment.
Available Values: no/ANL/PA/PIT
Default Setting: ANL (Automatic Noise Limiter)
See page 43 for details.
19 [ KEY2 ]
Function: Programming the third (press and hold
mode) [ USER ] key assignment.
Available Values: no/ANL/PA/PIT
Default Setting: PA (Public Address)
See page 43 for details.
51