The Dual Watch feature automatically checks for activ-
ity on a "priority" channel
another channel. During Dual Watch operation, the cur-
rent channel and the Priority channel will each be polled
for a 500 ms interval, as the FTA-310 looks for activity
on each channel.
To start Dual Watch,
press the [ F] key mo-
mentarily, then press
the [ SCAN ( DW )] .
The "
" icon will
appear on the display.
While receiving on the
"current" channel (not the
Priority channel), you may
push the PTT switch at any
time to transmit on that chan-
nel.
When a signal is received on the Priority channel,
operation immediately shifts to the Priority channel,
the "
" icon will blink, and the display will be-
come illuminated.
While receiving on the priority channel, if you mo-
mentarily press the PTT switch, Dual Watch will
be disabled. You may then transmit on the Priority
Channel.
34
d
w
ual
atcH
while you are operating on
o
peratIon
To stop Dual Watch, press [ F ] [ SCAN ( DW )] .
If you wish, you may use both the Dual Watch and
Scan features simultaneously. To do this, start the
Dual Watch first, then start the Scanner.
: The "priority" Channel is defined as the last-used
Memory Channel (when using the VFO mode) or Mem-
ory Channel 1 (when using the Main Memory or Book
Memory modes).
FTA-310 O
M
perATing
AnuAl