Table of Contents
Advertisement
installer selectable features
To enter the Installer Selectable Features grid follow the instructions for the User
Selectable Features with the exception of step 4. Perform step 4 as described below
to enter the Installer Selectable Features grid.
Hold/Chirp/Release - After entering the PIN code, press and hold
chirps once. Continue holding for approximately 10 seconds until the siren chirps
three times, then release the button. You have now entered the feature selection posi-
tion of the Installer Selectable Features grid.
First
Press
Then
Press
Lock pulse
single/double
Unlock pulse
single/double
Lock pulse
duration
0.8/3.5 sec
Domelight delay
on/off
*
P1 = Pulsed channel output is disabled with the ignition on or the alarm is
armed.
**
P2 = Pulsed channel output works anytime.
*** Only with optional IntelliStart connected.
**** Only with optional SmartWindows connected.
30
Acc. ouput A P1*/
Starter Kill
P2**/timed/latch/
no/nc
latch (ignition reset)
Acc. output auto
Program RPM***
active off/arm/
disarm/both
Acc. output timer
Engine type
duration
gas/diesel***
Not used
Program
SmartWindows****
until the siren
www.directed.com
Hide quick links:
Advertisement
Table of Contents
