Installer Selectable Features Descriptions - Clifford Arrow 5 Installation Manual

installer selectable features descriptions

lock pulse single/double
Single: One door lock pulse will be output when the system arms.
Double: Two door lock pulses will be output when the system arms.
unlock pulse single/double
Single: One door unlock pulse will be output when the system arms.
Double: Two door unlock pulses will be output when the system arms.
lock pulse duration 0.8/3.5 sec
0.8 seconds: The door lock pulses will be 800 milliseconds in length.
3.5 seconds: The door lock pulses will be 3.5 seconds in length.
domelight delay
On: No malfunction autobypass chirps will be generated if any door triggers or
the delay domelight are active when the system is armed.
Off: Malfunction autobypass chirps will be generated if any door triggers or the
delay domelight are active when the system is armed.
accessory output programming
The auxiliary accessory output wire (RED/WHITE) can be programmed for several dif-
ferent types of outputs.
P1 0.8 seconds: The pulsed output is disabled with the ignition on or the alarm
armed.
P2 0.8 seconds: The pulsed output will operate any time.
Timed: The length of output duration set.
Latched: The output on/off controlled by button(s) controlling accessory.
Latched (ignition reset): The output on/off controlled by button(s) controlling
accessory if on, will turn off when the ignition is turned on.
accessory output auto activation type
N N O O T T E E : : The accessory output will not auto-activate if the accessory output is pro-
grammed to either latched setting.
Off.
Arm: The accessory output will auto-activate when the system is armed.
© 2004 directed electronics, inc.
31