Assembling The Blades - Hunter T Owner's Manual And Installation Manual

Step 7-1 (Detail)
Grommet
Blade Assembly
Use with grommet
Use without grommet
Blade Mounting
Screw
41861-01 • 03/05/2010 • Hunter Fan Company
7 • Assembling the Blades
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
7-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
7-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly loose
after screws are tightened. This is normal.
7-3. Remove the blade mounting screws and rubber shipping bumpers
from the motor.
7-4. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Screws
12
Step 7-4
Steps 7-1 – 7-2