Hunter TYPE T Series Installation And Operation Manual
Hide thumbs
Also See for TYPE T Series:
- Owner's manual and installation manual (16 pages) ,
- Installation and operation manual (15 pages) ,
- Installation and operation manual (12 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
TYPE T Models
42645-01 • 05/16/07
Advertisement
Table of Contents
Related Manuals for Hunter TYPE T Series
Summary of Contents for Hunter TYPE T Series
- Page 1 Hunter For Your Records and Warranty Assistance Ceiling Fans Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE T Models For reference also attach your receipt or a copy of your receipt to the manual.
-
Page 2: Table Of Contents
Your Ceiling Fan..........12 • To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Troubleshooting ......... 13 use a solid-state speed control with this fan. Use only Hunter speed controls. © 2007 Hunter Fan Company... - Page 3 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 6: Assembling The Fan
Adapter 3-7. Raise the fan and align the slots in the canopy with the hooks on Low Profile the ceiling plate. Washer 3-8. Place the slots over the hooks to hang the fan. 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 7: Support System
4-8. Return to the fan so you can complete the fan wiring. Step 4-1 Steps 4-6 – 4-7 Steps 4-2 – 4-3 Steps 4-4 – 4-5 3mm (1/8") Support Brace Outlet Box Braided Ceiling Cable 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 8: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 9: Installing The Canopy And Canopy Trim Ring
Note: Should you need to remove the trim ring, press firmly on Canopy opposite sides of the trim ring directly above the groove in the Trim hanger ball. The tabs will flex out releasing the canopy trim ring. Ring Canopy Screw 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 10: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. -
Page 11: Completing Your Installation With Or Without A Light Fixture
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch Plug Connector housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-5 – 7-6 Lower Switch... -
Page 12: Operating And Cleaning Your Ceiling Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42645-01 • 05/16/07 • Hunter Fan Company... -
Page 13: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42645-01 • 05/16/07 • Hunter Fan Company...