Hunter T Owner's Manual And Installation Manual page 16

8 • Completing Your Installation With or Without a Light Fixture (continued)
Installing the Glass Bowl
1. First install two medium base incandescent bulbs.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
3. Thread the fan pull chain through the hole in the metal disk. Then,
thread the fan pull chain through the hole in the center of the glass
bowl.
4. Thread the light pull chain through the hole in the center of the glass
bowl.
5. Place the cover plate up against the glass bowl. Align the holes in the
cover plate and glass bowl.
6. Thread the fan pull chain and
light pull chain through the
appropriate holes.
7. Thread the light pull chain
through the finial and screw the
finial onto the threaded rod end
until tight.
Pull Chain
Breakaway
Connector
16
41861-01 • 03/05/2010 • Hunter Fan Company
for Light Bulbs
(60 Watt Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial