Replacing Battery Box Retaining Strap - Invacare P9000 XDT Operating & Maintenance Manual

SECTION 11—BATTERIES

Replacing Battery Box Retaining Strap

The battery box retaining strap MUST be fastened securely and adjusted properly
to hold battery boxes in place before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 11.10.
1. Remove the battery boxes from the wheelchair. Refer to Removing/Installing the
Battery Boxes on page 50.
2. Remove the battery tray from the wheelchair. Refer to Installing/Removing Battery
Tray on page 51.
The retaining strap MUST be fed through the adjustable end of the battery box
retaining strap buckle as shown in FIGURE 11.9.
NOTE: Take note of the position and orientation of the battery box retaining strap as it passes
through the slots of the battery tray and the adjustable end of the battery box retraining strap
buckle.
3. Feed the existing battery box retaining strap through the adjustable end of the battery
box retaining strap buckle.
4. Feed the existing battery box retaining strap through the slots in the battery box tray.
5. Install the new battery box retaining strap by reversing STEPS 3 and 4.
6. Reinstall the battery tray from the wheelchair. Refer to Installing/Removing Battery
Tray on page 51.
7. Reinstall the battery boxes from the wheelchair. Refer to Removing/Installing the
Battery Boxes on page 50.
Retaining
Strap
Battery Tray
FIGURE 11.10 Replacing Battery Box Retaining Strap
™
P9000 XDT
WARNING
WARNING
Adjustable End
Retaining
Strap Buckle
Slots
Retaining
Strap
Battery
Tray
Slots
Retaining Strap
60
Part No. 1118386